Why Does My JBL Speaker Keep Turning Off? (Answered)

If you own a JBL Xtreme, JBL charge 4, or JBL flip 5 that randomly shuts off, you know it can be aggravating.

Why Do JBL Speakers Turn Off Automatically?

There are a few possible reasons why your speaker might be shutting off on its own. It could be a problem with the battery, a connection issue, or a software glitch.

Let’s look at some of the most common causes of a JBL speaker turning off automatically.

Overheating

One of the most common reasons why JBL speakers turn off is because they’re overheating. This usually happens when the speaker is used for an extended time or in a hot environment, overwhelming the protection circuits.

Low Charge

JBL speakers may also turn off automatically if they are on low battery charge. You can check the battery charge on the battery level display.

Speakers require power to function, which isn’t available if the battery is low.

Corrupted Charging Logic

JBL speakers can also randomly shut off when the charging logic is corrupted. This means that the speaker doesn’t always know when it’s connected to a power source, which causes it to turn off randomly.

When the charging port is damaged or doesn’t make a good connection, it can also cause the charging logic to become corrupted. This, in turn, causes the speakers to turn off automatically.

Old or Outdated Firmware

A JBL speaker may turn off automatically if the firmware is old or outdated. JBL recommends that you update your firmware to the latest version to keep your speakers working properly.

Auto Off or Auto Standby Mode

Finally, some JBL speakers have an auto-off feature that kicks in after a period of inactivity, say 15 minutes. The thinking behind it is that if you’re not using the speaker, it shouldn’t be on.

This mode is designed to save energy, so your speakers can only consume power when you’re practically using them.

However, it’s worth noting that this feature can sometimes be triggered by mistake, such as corrupted charging logic or software glitch mentioned above.

So, if you’re using your speaker and suddenly it cuts out, the autoplay feature has likely been activated mistakenly.

How to Fix a JBL Speaker that Keeps Turning Off

Now that you understand why your JBL speaker turns off by itself, here are a few things you can try to fix the problem.

Charge the Speaker

It may seem obvious, but sometimes we forget to check the most basic things. So before spending hours troubleshooting your speaker, make sure to charge it first.

Once the speaker is fully charged, it should be able to play continuously without turning off. If it keeps turning off, another issue may be at play.

In that case, we recommend you check out the other troubleshooting tips discussed below.

Reset Your JBL Speaker

Another easy way to fix a JBL speaker that keeps turning off is to reset it. Depending on the buttons you have on your speaker, here are ways to reset JBL speakers:

• Press and hold both the Volume Up and the Play button or Bluetooth simultaneously for 5 seconds
• Press and hold the Volume Down and the Bluetooth button for 5 seconds
• Press and hold the power button and the play/pause button simultaneously for 30 seconds
• Press and hold the mute button for 15 seconds

Keep the Speaker Active

A tip to prevent the auto standby function from kicking in is to keep low-volume audio playing. That’s right, by playing low-volume audio, you can keep your JBL speaker from turning off automatically.

So if you’re having a party and want a break, just keep the music playing at a low volume. And if you’re taking a break from watching a movie, keep some sound playing.

This way, you won’t have to worry about the auto standby function kicking in and ruining your fun.

Repair Your Charging Port or Switch the Charging Cable

Check the charging port for any dirt or debris causing a connection problem. If the port is clean of your JBL speaker, try using a different charging cable.

If nothing still works, you may be dealing with a corrupted charging logic that can be fixed with the tip below.

Let the Speaker Drain, and then Charge It Again

If the JBL speaker you have has a corrupted charging logic, don’t panic – you can fix it! Just let the speaker drain, then charge it again. This usually does the trick.

If your JBL speaker is still acting up due to corrupted charging logic, then you might need to reset it, as discussed earlier, or update the speaker firmware as discussed below.

Update Your Speaker’s Firmware

For JBL speakers that keep turning off, there’s another brilliant, quick, and easy fix. All you need to do is update the speaker’s firmware using the JBL CONNECT app.

The app is available for both Android and iOS devices, and it’s free to download. Once the app is installed, simply open it and follow the instructions to update your speaker’s firmware.

Cool Down Your JBL Speaker

Lastly, if you’re dealing with an overheating problem, first, make sure the speaker is in a well-ventilated area so it can cool down properly.

You can also try turning the speaker off for a few hours to allow it to cool down completely.

Frequently Asked Questions

Q: Why Does The JBL Flip 4 Keep Turning Off?

It could be a problem with the battery, the speaker itself, or even the firmware. If you’re unsure what the problem is, we recommend you reset the speaker.

Q: Why Does My JBL Speaker Keep Disconnecting On My Phone?

There are a few possible explanations for why this happens. It could be due to low battery charge, a problem with previous Bluetooth connections, or it could be an issue with your phone’s Bluetooth connection.

Q: What Are The Causes And Fixes For An Unresponsive JBL Speaker?

If your speaker is not charged, it will not be able to turn on. You can check the charge level by looking at the LED indicator on the speaker. If the LED is not lit, the speaker needs to be charged.

Another potential cause is damaged batteries. If the batteries in your speaker are damaged, they will not be able to power the speaker. You will need to replace the batteries with new ones.

Finally, if the circuit board in your speaker is damaged, it will not be able to turn on. Take the speaker to a technician to repair or replace the circuit board with a new one.

Q: Why Won’t My JBL Speaker Turn Off?

If you’re having trouble turning off your JBL speaker, it could be due to a software glitch or a damaged power button.

If it’s a software glitch, you can try resetting the speaker by disconnecting it from the power source and then reconnecting it.

You’ll need to contact JBL customer service for repair if the power button is damaged.

Q: Why Does My JBL Speaker Turn On And Off?

If you’re having trouble with your JBL speaker turning on and off, it’s probably due to a problem with the power button.

Some people have tried taping the power button down, but that doesn’t really work.

The only real solution is to take your speaker to a technician and have them take a look at it.

The Bottom Line

JBL speakers are known for their quality sound and long battery life. But sometimes, users may find that their JBL speakers turn off automatically after a short time.

This can be frustrating, especially if you’re in the middle of listening to music or watching a movie.

Luckily you now know the causes of this problem and how you can fix it. The solution can be as easy as updating your speaker’s firmware, resetting it, or cooling it down.

A more advanced inspection of your speaker’s charging port and charging logic may also be required to fix the problem.

Either way, the problem of a JBL speaker turning off automatically can definitely be rectified.